Sachtler DV12SB

Payload 14 kg / 30.9 lbs

Weight (without cover/bag) 6.9 kg / 15.2 lbs

Height min. 82 cm / 32.3 in

Height max. 159 cm / 62.6 in

Transport length 101 cm / 39.8 in

Fluid head DV12SB

The key to Sachtler?s successful fluid heads is their step switching. Now our innovative SPEEDBALANCE technology enables even faster and finer counterbalance of your camera system. By reducing the minimum payload, the heads? overall payload range is increased.

The fluid head DV 12 SB is delivered with the Touch & Go? plate 16 (Code No. 1064). It comes with a 1/4? screw and 3/8? screw. Spare camera screws (1/4?/ 3/8?) and a pin screw are stored in the balance plate. The pin screw fits in the center hole of the camera plate. Thus a pin/1/4? screw connection can be achieved if your camera requires this connection.

If your camera remains front- or back heavy after going through the necessary centring procedure you may solve this by using the C.O.G plate (Code No. 1063). This plate offers a removed position.The C.O.G. plate can be mounted to either the front or the back. It cannot be operated with pin and 1/4? screw.

Fluid head : Technical data

Weight 2.7 kg / 6 lbs

Payload 1 - 14 kg / 2.2 - 31 lbs

Sliding range - plate 70 mm / 2.8 in

Counterbalance in 12 steps

Grades of drag 5 each horizontal and vertical + 0

Tilt range +90/-75?

Temperature range -40? to +60? C / -40 to +140? F

Camera fitting Touch & Go Plate 16

Tripod/Pedestal fitting 100 mm bowl, integrated flat base fitting

Pan bar(s) 1, Type DV 100

Level self-illuminating Touch Bubble

Batteries Level 3 x 625U or LR9

Adapter viewfinder extension optionally

Payload

C.O.G.* [mm] / C.O.G.* [in] min. kg / min. lb max. kg / max. lb

75 / 3" 1.7 / 3.7 17.6 / 38.8

100 / 4" 1.4 / 3.2 14.9 / 32.9

125 / 5" 1.3 / 2.8 13.0 / 28.6

150 / 6" 1.1 / 2.4 11.5 / 25.3

175 / 7" 1.0 / 2.2 10.3 / 22.6

200 / 8" 0.9 / 2.0 9.3 / 20.5