MANOSTAR Differential Pressure Switch MS61AHV300D |
฿ไม่ระบุ |
|
ชื่อผู้ประกาศ : สุเอก ชูศักดิ์ / KPB Enterprise Co., Ltd. เบอร์โทรศัพท์ : 0-2457-6470-3 โทรศัพท์มือถือ : 08-1923-5473 ที่อยู่ : 277 ซอยเพชรเกษม 48 แยก 4-7, ถนนเพชรเกษม แขวงบางด้วน เขตภาษีเจริญ กรุงเทพมหานคร การติดต่ออื่นๆ : www.kpbgroup.com |
รายละเอียดสินค้า
MANOSTAR Micro Differential Pressure Switch
Model : MS61AHV300D
MS61A :- Series
H :- Setting of Scale (For Upper Limit Setting)
V :- Tube Tap (For Vinyl or Plastic Tube)
300 :- Pressure Range (Maximum Value of Scale)
D :- Unit (Pa)
Blank :- Contact (For General Electrical Load)
- Pressure Range : 50 ~ 300 Pa
- Accuracy of Switching Point (at 20 C) : +,-15.0 Pa
- Maximum Switching Difference Pressure : 40.0 Pa
- Contact Rating : SPDT, 30VDC 3A, 125VAC 5A, 250VAC 5A
- Pressure Measuring Method : Measuring Differential Pressure
- Pressure Receiving Element : Diaphragm (Silicone Rubber)
- Gases to be Measured : Air, Non-Corrosive and Non-Combustible Gases (Not Liquid)
- Pressure Setting Method : Dial With Scale
- Standard Installation Position : From Upward Horizontal to Vertical is Available
- Medium and Ambient Temperature : -10 to 50 C (No Freezing)
- Ambient Humidity : 90 %RH of Less (No Dewing)
- Withstanding Pressure of Instrument Body : 100 KPa
- Withstanding Pressure of Receiving Element : 20 KPa
- Material of the Outer Case : Polyamide
- Withstanding Vibration : 5 to 10 Hz Amplitude : 10 mm, 10 to 50 Hz Acceleration : 39 m/s2
- Withstanding Impact : 100 m/s2
- Applicable Piping : Vinyl, Plastic or Rubber Tube (I.D. 4)
- Tube Tap Polarity : The Part of Tube Tap is Marking "H" on High Pressure Side and "L" on Low Pressure Side
- Weight : Approximately 140 g
Mfg. YAMAMOTO ELECTRIC WORKS CO., LTD.
Made in Japan
PressureELECTRICMANOSTARMS61AHV300DYAMAMOTOSwitch
Model : MS61AHV300D
MS61A :- Series
H :- Setting of Scale (For Upper Limit Setting)
V :- Tube Tap (For Vinyl or Plastic Tube)
300 :- Pressure Range (Maximum Value of Scale)
D :- Unit (Pa)
Blank :- Contact (For General Electrical Load)
- Pressure Range : 50 ~ 300 Pa
- Accuracy of Switching Point (at 20 C) : +,-15.0 Pa
- Maximum Switching Difference Pressure : 40.0 Pa
- Contact Rating : SPDT, 30VDC 3A, 125VAC 5A, 250VAC 5A
- Pressure Measuring Method : Measuring Differential Pressure
- Pressure Receiving Element : Diaphragm (Silicone Rubber)
- Gases to be Measured : Air, Non-Corrosive and Non-Combustible Gases (Not Liquid)
- Pressure Setting Method : Dial With Scale
- Standard Installation Position : From Upward Horizontal to Vertical is Available
- Medium and Ambient Temperature : -10 to 50 C (No Freezing)
- Ambient Humidity : 90 %RH of Less (No Dewing)
- Withstanding Pressure of Instrument Body : 100 KPa
- Withstanding Pressure of Receiving Element : 20 KPa
- Material of the Outer Case : Polyamide
- Withstanding Vibration : 5 to 10 Hz Amplitude : 10 mm, 10 to 50 Hz Acceleration : 39 m/s2
- Withstanding Impact : 100 m/s2
- Applicable Piping : Vinyl, Plastic or Rubber Tube (I.D. 4)
- Tube Tap Polarity : The Part of Tube Tap is Marking "H" on High Pressure Side and "L" on Low Pressure Side
- Weight : Approximately 140 g
Mfg. YAMAMOTO ELECTRIC WORKS CO., LTD.
Made in Japan
PressureELECTRICMANOSTARMS61AHV300DYAMAMOTOSwitch
