WATANABE DC Voltmeter AP-502A-11 |
฿ไม่ระบุ |
ชื่อผู้ประกาศ : สุเอก ชูศักดิ์ / KPB Enterprise Co., Ltd. เบอร์โทรศัพท์ : 0-2457-6470-3 โทรศัพท์มือถือ : 08-1923-5473 ที่อยู่ : 277 ซอยเพชรเกษม 48 แยก 4-7, ถนนเพชรเกษม แขวงบางด้วน เขตภาษีเจริญ กรุงเทพมหานคร การติดต่ออื่นๆ : www.kpbgroup.com |
รายละเอียดสินค้า
WATANABE DC Voltmeter
Model : AP-502A-11
Model Configuration
AP : Basic Name
-
502A : Series Name
-
11 : DC Voltage Measurement Range, +,-199.9mV
Specification :-
- Operating Method : Double Integral
- Input Configuration : Single Ended
- Input Bias Current : 50PA (TYP.)
- Sampling Rate : 2.5 times per second
- Rejection : 40dB or more (50/60 Hz)
- Display Range : Max. 1999 (3 1/2 digits)
- Over Range Display : When Input Exceeds the Maximum Display, 1999 Flashes.
- Display : Red 7 Segment LED (Height 14.2mm)
- Polarity : "-" is Displayed at Negative Polarity
- External Control : Hold, Hold when 0V (Short the Terminal Between HOLD Terminal and COM Terminal)
: Decimal Point, Abel to set to any Digit by Terminal Between D.P and COM
- External Output : Serial Data Output
- Operating Temperature : 0 to 50C
- Operating Relative Humidity : 35 to 85% (non-condensing)
- Power Supply : 5VDC +,-5% 120mA Max.
- Power Consumption : 120mA Max.
- Dimensions : 96(W) x 48(H) x 33(D) mm DIN Size
- Weight : Approx. 60 g
- Dielectric Strength : 500VDC per 1 min., Between input Terminal (LO) and Power Supply Terminal (0V)
: 1500VAC per 1 min., Between Input Terminal (LO) and Mounted Plate
- Insulation Resistance : 500VDC, 100M Ohms or more on the above terminals
Mfg. : WATANABE ELECTRIC INDUSTRY CO., LTD.
Made in Japan
DigitalAP-502A-11ASAHIWATANABEMeterPanelKEKIKIVoltmetermeter
Model : AP-502A-11
Model Configuration
AP : Basic Name
-
502A : Series Name
-
11 : DC Voltage Measurement Range, +,-199.9mV
Specification :-
- Operating Method : Double Integral
- Input Configuration : Single Ended
- Input Bias Current : 50PA (TYP.)
- Sampling Rate : 2.5 times per second
- Rejection : 40dB or more (50/60 Hz)
- Display Range : Max. 1999 (3 1/2 digits)
- Over Range Display : When Input Exceeds the Maximum Display, 1999 Flashes.
- Display : Red 7 Segment LED (Height 14.2mm)
- Polarity : "-" is Displayed at Negative Polarity
- External Control : Hold, Hold when 0V (Short the Terminal Between HOLD Terminal and COM Terminal)
: Decimal Point, Abel to set to any Digit by Terminal Between D.P and COM
- External Output : Serial Data Output
- Operating Temperature : 0 to 50C
- Operating Relative Humidity : 35 to 85% (non-condensing)
- Power Supply : 5VDC +,-5% 120mA Max.
- Power Consumption : 120mA Max.
- Dimensions : 96(W) x 48(H) x 33(D) mm DIN Size
- Weight : Approx. 60 g
- Dielectric Strength : 500VDC per 1 min., Between input Terminal (LO) and Power Supply Terminal (0V)
: 1500VAC per 1 min., Between Input Terminal (LO) and Mounted Plate
- Insulation Resistance : 500VDC, 100M Ohms or more on the above terminals
Mfg. : WATANABE ELECTRIC INDUSTRY CO., LTD.
Made in Japan
DigitalAP-502A-11ASAHIWATANABEMeterPanelKEKIKIVoltmetermeter