MANOSTAR Differential Pressure Switch MS99HV120DH

฿ไม่ระบุ

ชื่อผู้ประกาศ : สุเอก ชูศักดิ์ / KPB Enterprise Co., Ltd. เบอร์โทรศัพท์ : 0-2457-6470-3 โทรศัพท์มือถือ : 08-1923-5473 ที่อยู่ : 277 ซอยเพชรเกษม 48 แยก 4-7, ถนนเพชรเกษม แขวงบางด้วน เขตภาษีเจริญ กรุงเทพมหานคร การติดต่ออื่นๆ : www.kpbgroup.com

MANOSTAR Differential Pressure Switch

Model : MS99HV120DH

 

MS99 : Micro Differential Pressure Switch

H : Setting of Scale, For Upper Limit Setting

V :

120 : Pressure Range, Maximum Value of Scale

D : Unit, Pa

H :- Installation Position, Horizontal

 

- Pressure Range : 20 ~ 120 Pa

- Accuracy of Switching Point (at 23 C) : +,- 5.0 Pa

- Maximum Switching Difference Pressure : 25.0 Pa

- Withstanding Pressure of Instrument Body and Receiving Element : 10 kPa

- Pressure Measuring Method : Measuring Difference Pressure

- Receiving Pressure Element : Diaphragm (Silicone Rubber)

- Contact Material : Silver Alloy / Gold Plating

- Gas to be Measured : Air and Non-Corrosive Gas (Not Liquid)

- Pressure Setting Method : Setting by Dial With Scale

- Installation Position : Horizontal

- Medium and Ambient Temperature : -10 to +60 C (Without Freezing)

- Ambient Humidity : 90% RH or Less (Without Condensation)

- Material of Outer Case : Polycarbonate

-

Withstanding Vibration : 5 to 10 Hz Amplitude : 10 mm, 10 to 50 Hz Acceleration

: 39 m/s²

- Withstanding Impact : 100 m/s² (Six in each Tri-axial Direction)

- Applicable Piping : Vinyl or Rubber Pipe (Inner Diameter 4mm)

-

Piping Connector Polarity : The part of Connector Piping is Mark "H" on High

Pressure Side and "L" on Low Pressure Side.

- Weight : Approximately 170g

 

Mfg. YAMAMOTO ELECTRIC WORKS CO., LTD.

Made in Japan

MANOSTARSwitchMS99HV120DHPressureDiffYAMAMOTODifferentialKSIKI