MANOSTAR Differential Pressure Switch MS65LML120D

฿ไม่ระบุ

ชื่อผู้ประกาศ : สุเอก ชูศักดิ์ / KPB Enterprise Co., Ltd. เบอร์โทรศัพท์ : 0-2457-6470-3 โทรศัพท์มือถือ : 08-1923-5473 ที่อยู่ : 277 ซอยเพชรเกษม 48 แยก 4-7, ถนนเพชรเกษม แขวงบางด้วน เขตภาษีเจริญ กรุงเทพมหานคร การติดต่ออื่นๆ : www.kpbgroup.com

MANOSTAR Differential Pressure Switch

Model : MS65LML120D

 

MS65 : General Purpose Type, Differential Pressure Switch

Blank : Without Air Filter

L : Setting of Scale, For Lower Limit Setting

ML : Piping Connector, For Metal Tube, ML Rotary Loose Type

120 : Pressure Range, Maximum Value of Scale

D : Unit, Pa

-

Blank : Contact, For General Electrical Load

 

- Pressure Range : 20 ~ 120 Pa

- Accuracy of Switching Point (at 20 C) : +,-4.0 Pa

- Maximum Switching Difference Pressure : 20.0 Pa

- Material of Pressure Receiving Element : Polyester Film

- Pressure Measuring Method : Measuring Difference Pressure

- Pressure Receiving Element : Diaphragm

- Gas to be Measured : Air, Non-Corrosive and Non-Combustible Gases (Not Liquid)

- Pressure Setting Method : Dial With Scale

-

Standard Installation Position : Installation Position from Upward Horizontal

to Vertical is Available.

- Medium and Ambient Temperature : -10 to +50  (No Freezing)

- Ambient Humidity : 90% RH or Less (No Dewing)

- Withstanding Pressure of Instrument Body : 200 kPa

- Withstanding Pressure of Receiving Element : 40 kPa

- Material of Outer Case : Phenol Resin and Aluminum Die Cast

-

Piping Connector Polarity : The part of Connector Piping is Mark "H" on High

Pressure Side and "L" on Low Pressure Side.

- Weight : Approximately 380g

 

Mfg. YAMAMOTO ELECTRIC WORKS CO., LTD.

Made in Japan

MANOSTARMS65LML120DYAMAMOTOPressureDiffSwitch