MANOSTAR Differential Pressure Switch MS61ALV120D

฿ไม่ระบุ

ชื่อผู้ประกาศ : สุเอก ชูศักดิ์ / KPB Enterprise Co., Ltd.

เบอร์โทรศัพท์ : 0-2457-6470-3

โทรศัพท์มือถือ : 08-1923-5473

ที่อยู่ : 277 ซอยเพชรเกษม 48 แยก 4-7, ถนนเพชรเกษม แขวงบางด้วน เขตภาษีเจริญ กรุงเทพมหานคร

การติดต่ออื่นๆ : www.kpbgroup.com

รายละเอียดสินค้า

MANOSTAR Micro Differential Pressure Switch

Model : MS61ALV120D

MS61A :- Series

L :- Setting of Scale (For Lower Limit Setting)

V :- Tube Tap (For Vinyl or Plastic Tube)

120 :- Pressure Range (Maximum Value of Scale)

D :- Unit (Pa)

Blank :- Contact (For General Electrical Load)

- Pressure Range : 20 ~ 120 Pa

- Accuracy of Switching Point (at 20 C) : +,-5.0 Pa

- Maximum Switching Difference Pressure : 25.0 Pa

- Contact Rating : SPDT, 30VDC 3A, 125VAC 5A, 250VAC 5A

- Pressure Measuring Method : Measuring Differential Pressure

- Pressure Receiving Element : Diaphragm (Silicone Rubber)

Gases to be Measured : Air, Non-Corrosive and Non-Combustible Gases (Not

Liquid)

- Pressure Setting Method : Dial With Scale

Standard Installation Position : From Upward Horizontal to Vertical is

Available

- Medium and Ambient Temperature : -10 to 50 C (No Freezing)

- Ambient Humidity : 90 %RH of Less (No Dewing)

- Withstanding Pressure of Instrument Body : 100 KPa

- Withstanding Pressure of Receiving Element : 20 KPa

- Material of the Outer Case : Polyamide

- Withstanding Vibration : 5 to 10 Hz Amplitude : 10 mm, 10 to 50 Hz Acceleration : 39 m/s²

- Withstanding Impact : 100 m/s²

- Applicable Piping : Vinyl, Plastic or Rubber Tube (I.D. 4)

- Tube Tap Polarity : The Part of Tube Tap is Marking "H" on High Pressure Side and "L" on Low Pressure Side

Weight : Approximately 140 g

Mfg. YAMAMOTO ELECTRONIC WORKS CO., LTD.

Made in Japan